Working Based on existing GSM/GPRS network
and GPS satellites, Set burglar alarm, positioning, monitoring，
aid and tracking in the integration of new product. This product
can locate and monitor any remote targets by SMS or internet.
1.2.1 Built-in GSM, GPS antenna, compact, elegant appearance.
1.2.2 Support GPS and LBS (Location based service) double
1.2.3 Support SMS/GPRS/Internet Network data transmission (GPRS/Internet
instructions includes in CD in package）
Support configure the settings remotely
1.2.5 Set multiple functions of security, tracking, monitoring
surveillance, emergency alarms and management in its entirety.
Used widely for person, cargo and other moving objects
3.1, Model A
Accessories: wall charger, manual book, disc, screw, USB cable.
Function: basic function
3.2 Model B
3-pin cable, manual book, disc, screw.
function: Outer power cut alarm, ACC start alarm.
3.3 Model C/D
cable, relay, manual book, disc, screw, siren optional, remote
control optional for D.
Outer power cut alarm, ACC start alarm, cut off power/fuel
3.4 Model E
cable, manual book, disc, screw, siren, 2 remote controls
drive without key, automatically lock motor when alarm
3.5 Model F/G
cable, relay, outer MIC, manual book, disc, screw, siren
optional, fuel sensor optional, remote control optional for G
Outer power cut alarm, ACC start alarm, cut off power/fuel
Fuel check and alarm
12 V -24V
3.7V 700mAh Li-ion battery
6.1 SIM CARD
Use the screwdriver accompanied with the device
to open sealed buckle and insert the SIM card, the SIM card is
placed correctly if heard the sound of lock, the SIM will
automatically pop up if press it gently. If need data logging
function, please insert microSD and put sealed buckle back
make sure the SIM card is for GSM network and able to execute
the function of incoming calls display, no calls can be diverted
and the PIN code is locked. The SMS format must be TXT format,
and can’t recognize the PDU format.
GSM/GPS LED Indicator
LED: when charging, LED ON, After full charged, LED OFF,
power, LED flash fast.
LED: In GSM Mode, LED quick flash for each second, In GPRS
Mode, LED flash one time in three seconds, when No GSM
reception, LED ON.
LED: In good GPS reception, LED quick flash for each second,
reception, LED OFF.
Send “begin+password” in SMS to the unit, it will reply “begin
ok” and initialize all the settings. (Default password: 123456)
For example, send SMS
“begin123456” to the tracker via a cell phone, if succeeded, if
will reply “begin ok”.
Send SMS “password+old password+space+new password” to the unit
to change the password.
For example: send
SMS “password123456 888888” to the unit. If succeeded, “password
ok” will reply to your cell phone from the device tracker.
Be sure to keep the
new password in mind, you have to upload the software to restore
the original setting in case of losing the new password.
Attention: Make sure the new password is in 6 digits Arabic
numbers, or else the tracker cannot recognize the password.
The “+” in the command, please don’t type “+”, space means press
the space keyboard on your cell phone
There are only 5 cell phone numbers able to be
be sure to set the authorization phone
number before use.
Call the tracker for
10 times continuously and get position correctly, then it will
make the cell phone number as the authorized number
Authorization Send SMS：“admin+password+space+cell
phone number” to set up a authorized number. The other
authorized numbers should be set by the first authorized number.
If the number is successfully authorized, the unit will reply
“admin ok!” in SMS.
Delete authorization Send SMS：“noadmin+password+space+authorized
number” to delete the authorized number.
For roaming purpose, you have to add your country code ahead of
the cell phone number, for example, please send：“admin123456
+8613322221111” to tracker to set 13322221111 as an authorized
Any number calls the tracker device, it will reply a SMS
including the position of latitude and longitude if authorized
number is not set. If authorized number has set successfully,
the device won’t reply SMS including the positioning of latitude
and longitude when the unauthorized number dials up it.
Dialing the tracker device from the authorized number, it will
hang up your calling and respond to a real-time latitude and
longitude information as following:
Tracking location ,
When no GPS signal, the SMS includes the last valid latitude &
longitude as well as the LAC code of current position, the LAC
code can be input in the column of “manual track” menu of web
platform to check location.
6.7 Auto track
6.7.1 Track with
limited times upon time interval:
SMS command “fix030s005n +password”
to the tracker device, it will report the latitude & longitude
at intervals of 30 seconds for 5 times. (s:second, m:minute,
h:hour). This command set must be in 3 digits and the maximum
value is 255.
6.7.2 Track with
unlimited times upon time interval:
Send SMS “fix030s***n+password”
to the tracker device, it will reply the latitude & longitude
continuously at interval of30 seconds.
Note: the interval
must not less than 20s.
6.7.3 Smart track
upon time and distance interval:
188.8.131.52 Please set
"track with unlimited times upon time interval" before this
function, and send "distance+password+space+distance", tracker
will reply "Distance ok", and then tracker will locate upon both
the pre-set time and distance.
"distance123456 0050", it means distance is 50 meters; the
number must be 4 digits Arabic numbers.
184.108.40.206 Set this
function on web server: Set time interval first and then
distance interval, tracker will locate upon the time and
Send SMS “nofix+password” to the tracker device to cancel the
6.8 Automatic update
positions of vehicle turns
6.8.1 The tracker
will update the positions automatically to web server once the
vehicle changing driving direction over pre set angle value to
form a smooth trajectory consistent with the actual road, this
function is only effective in GPRS mode.
6.8.2 Send "angle+password+space+angle"
to tracker, it will reply" angle ok".
6.8.3 The angle must
be 3 digits Arabic numbers, default angle value is 30 degree.
6.9 GPS drift suppression
This function is
deactivated as default, send "suppress+password" to tracker, it
will reply" suppress drift ok". The GPS data stop updating if
vehicle is not driving (ACC is OFF) and latitude and longitude
always keep same, and GPS data updates automatically when
vehicle is moving.
Cancel: send "nosuppress+password" to tracker, it will reply"
nosuppress ok ".
6.10. Absolute street address by SMS
You must set up
the APN of your local GSM network for the SIM card in tracker
first before using this function, if there is user name and
password for GPRS login, (Please refer to 6.29 to configure the
APN, user name and password for GPRS login.)
the APN, send "address+password" to device, it will reply SMS
including real street/address name. For example: No.113, Guankou
2nd Rd, Nantou, Nanshan district, Shenzhen, Guangdong, china.
6.11. Location based
When the tracker
device doesn’t received valid GPS signals, tracker will
positioning by location based service(LBS), the messages
includes the GPS coordinates of the last position in SMS mode,
but the LAC in message is the current new position, the location
can be seen by input the LAC code in the menu “Manual Track” of
www.gpstrackerxy.com, you can also send command
“address+password” to tracker to get the newest absolute address
and GPS coordinates as well; tracker will automatically switch
to track by location based service in GPRS mode, and actualized
on the map of web server with LBS mark. And there may be some
inaccuracy with actual location by LBS tracking; the bias
depends on GSM reception.
Note: This feature
can be used normally in most areas according to the signal of
GSM network. It may not be available in some areas.
6.12. Voice Monitor
The command to
switch between Track and Monitor mode are “tracker” and
6.12.2 The default
mode is “track” (Track mode).
6.12.3 Send SMS
“monitor+password” to the unit, and it will reply“monitor ok!”
and switch to “monitor” mode.
6.12.4 Send SMS “tracker+password” to the unit, it will
reply “tracker ok!” and restore to “track” mode.
6.13.1 When the tracker devices lost GSM signals or
fall offline from GPRS, tracker will store the tracking position
and alerts automatically upon the pre-set condition, when GSM
signals get back, all the event alerts will be auto-sent to the
authorized numbers or monitoring platform (server), but the
stored tracking data should be loaded to the monitoring platform
via SMS command.
6.13.2: Storage upon times: Send SMS:
“save030s005n+password” to the tracker unit, it will reply “save
ok”, and will store the lat, long locations every 30 seconds for
5 times. (S: second, m: minute; h: hour).
6.13.3 Unlimited storage：Send
sms:”save030s***n+ password” to tracker device, it will reply
6.13..4: Storage Clearance: Send SMS: “clear+ password”
to tracker device, it will reply “clear ok”.
It depends on the capacity of the SD card inserted in the
The stored data in SD card can be copied to computers through
card reader, and then the data route can be checked by importing
data in the menu “Data Import” of web platform
6.14. Data Load
Current date Load: Send SMS: “load+ password” to tracker
device, it will reply: “load ok” if the device is working well
under GPRS mode; if not, it will reply “load fail! Please check
gprs” that means device does not work under GPRS mode. Data can
only be loaded to monitoring platform by GPRS.
Specified date Load：
Send SMS: “load+ password+ space+ year month date” to tracker
device, it will reply: “load ok” .For Example: send SMS:
“load123456 20110425” to the tracker device, means to load the
tracking data of 25th April 2011 to monitoring platform.
6.15. Forward the third
6.15.1 Send SMS "forward+password+space+third parties phone number"
from authorized phone number, tracker will reply"forward ok",
and supports 1 third parties phone numbers at most.
For example, set the
phone number of the service provider of the sim card in the
tracker, when charge remind message coming in, tracker will
forward it to authorized phone number.
Cancel: Send SMS command "noforward+password".
6.16. Charges Inquiry
Send SMS command "balance+password+space+carrier’s
phone number+space+code" to tracker, it will forward the
code to carrier’s phone number and return the balance message
received from carrier’s phone number.
Send SMS “lowbattery+password+space+on”,
it will send SMS “low battery+latitude/longitude” to authorized
numbers 2 times in total
in 15 minutes
when voltage of battery is going to be about 3.55V.
activates as default, send SMS “lowbattery+password+space+off”
deactivates as default, send SMS “gpssignal+password+space+on”,
it will send alert SMS “no gps+last valid latitude/longitude
before lost signal”
“gpssignal+password+space+off” to deactivate.
Press the SOS button for 3 seconds, the tracker device will send
SMS “help me!+lat./long.” to all the authorized numbers at
interval of 3 minutes. It will stop sending such as alert SMS
when any authorized number reply SMS “help me” to the tracker.
Set up a
geo-fence for the tracker device to restrict its movements
within a district. The unit will send SMS to the authorized
numbers when it goes out of this district.
When the unit stays immobile in a place for 3-10 minutes, the
user can send
to unit to set the restricted district. In case of breach, it
will send SMS “stockade!+
latitude & longitude” to the
authorized numbers at interval of 3 minutes.
The first latitude & longitude is coordinate of the top left
corner of the Geo-fence, while the second latitude & longitude
is the coordinate of the bottom right corner, it will alarm at
interval of 3 minutes.
Send SMS “nostockade+password” to deactivate this function.
220.127.116.11 Set Area
Send SMS command "area+password+space+latitude,longitude+space+areaname,distanceM"
to tracker(distance unit: M for meter, K for kilometer), it will
reply "area01 ok".
"area123456 22.353648,113.543678 school,800M".
Note: 5 areas at
most and the distance between two points can't be less than the
total distance in the 2 commands, and different areas can't
cover each other.
command:"noarea+password+space+area name", tracker will
Rename and set
Send SMS command "rename+password+space+old
name;new name,distanceM" to tracker, if name is not repeated and
area doesn't cover others, it will reply "rename ok!" for
", it means the new area name is "school", and covers area of a
radius of 800 meters.
Activate multi-area management
Send SMS command "area+password+space+on"
to tracker, it will reply "Area on ok!", when tracker enter the
pre set area, it will send SMS "area name+latitude & longitude"
to all the authorized phone number, and send same SMS when goes
out of the area.
Send SMS command
"area+password+space+off" to tracker, it will reply"area off
Set up: when the
unit stays immobile in a place for 3-10 minutes with GPS signal
reception, the user can send SMS“move+password+space+0200” to
the tracker (Suppose area of a radius of 200 meters, it supports
4 digits at most. Unit: Meter). It will reply “move OK”. In
case of such a movement (the default distance is 200m), it will
send SMS “Move+ latitude & longitude” to the authorized numbers
at interval of 3 minutes.
Send SMS “nomove+password” to deactivate the movement alarm.
Set up: Send SMS
“speed+password+space+080” to the unit (suppose the speed is
80km/h), and it will reply “speed OK!”. When the target moves
exceeding 80km/h, the unit will send SMS “speed+080!+ latitude &
longitude” to the authorized numbers at interval of 3 minutes.
Cancel: Send SMS
“nospeed+password” to deactivate the overspeed alarm.
recommended speed should be not less than 30km/h. For below that
rate, it will be effected the accuracy by GPS signals drift etc.
Set up arm by SMS
Send “arm+password” to tracker, it will make the car enter ARM states and and
reply “Tracker is activated”.
Send command “disarm+password” to tracker, tracker will disarm and
reply “Tracker is deactivated”, then it will turn off the alarm
function, and no alarms if trigger shock sensor .
6.20.1 The unit will send SMS “Sensor alarm+lat/long” to the
authorized number when the sensor is triggered in arm status;
send “disarm+password” to stop it.
6.20.2 Shock sensor sensitivity configuration:
The sensitivity of the built-in shock sensor has three different
First level: Alarm will be triggered after detect slight
vibration, send command" sensitivity+password+space+1" .
Second level: Alarm will be triggered after detect 8 times
vibration in 2 seconds, send command"
Third level: Alarm will be triggered after detect 25 times
vibration in 5 seconds, send command"
Check the Vehicle State
Send SMS command “check+password” to the tracker device in the
vehicle, It will reply the status of the power, battery, GPS,
ACC, door, GSM signal, GPRS status and oil to the authorized
For example: Send SMS “check123456” to the tracker device in the
vehicle, It will reply following SMS.
GPS: OK/NO GPS
GSM Signal: 1-32
The higher digit it shows; the
stronger of GSM signals it receives.
Send SMS “reset+password” to tracker device, it will reply
“reset ok”. And the GSM module and GPS module in the tracker
will be reset.
Send SMS command "sleep+password+space+time" to tracker device,
tracker will reply "sleep time ok" if none of the alarms has
been set and no operations, tracker will fall asleep in 5
minutes, GPS module shuts down, LED will be off ,calling or SMS
can awake the tracker. If these alarms have been set, tracker
will sleep by detecting shock sensor. (This mode only works
under SMS mode)
Send SMS command
"sleep+password+space+shock"to tracker device, tracker will
reply "sleep shock ok", it will enter sleep mode if no shake is
detected or ACC is off , GPS module shuts down, LED will be off
. Shake or any operation can awake the tracker . (This mode only
works under SMS mode)
Deep Sleep by Shock Sensor
"sleep+password+space+deepshock", tracker will reply "
sleep deepshock ok!" it will enter deep sleep mode if no
vibration detecting, GPS & GSM module shut off, and LED will be
off too. Only vibration can awake it, and tracker will send
awake message” deep shock!”
automatically after wake up.
No sleep mode
SMS “sleep+password+space+off”, it will reply “sleep off ok”.
Tracker won’t sleep and GSM, GPS, always work.
1h",device will wake up every hour,and send location information
minute, h: hours, d: days) interval time is
digits at most ,
no more than 30 days.
After enter this
mode, GPS & GSM module shut off, LED will be off too. Device in
operation. can not wake up by calling and SMS messages.
alarms can be triggered and work, device return to the regular
wake-up mode until alarm is canceled.
after device is wake up ,send “noschedule+password” to cancel
Send SMS command "imei+password"
to the unit. E.g. Send SMS command "imei123456" to the tracker
device, an IMEI number in 15 digits will reply to your cell
Set up Terminal (local) Time
6.26.1 Send SMS command “time+space+zone+password+space+time” to
the tracker unit, If succeed, It will reply “time OK”
6.26.2 For example: Send SMS “time zone123456 8”, 8 is Chinese
time zone, If your country time zone is minus, send SMS “time
TCP / UDP Switch
"gprs+password,0,0" switch back to TCP mode, this is the default
command:"gprs+password,1,1" switch to UDP mode.
Configure parameters by USB
Connect the gps
tracker to computer with the optional USB cable, find gps
tracker’s internal memory and open serial debugging tool
the format of text , edit the command according the tips. .
Correct password is need every time you configure the tracker.
must send SMS via cell phone to set up IP, port and APN before
APN standards for Access Point Name and differs from country to
country. For more information about the local APN, inquire with
your local GPRS network operator.
Text the tracker a SMS “APN+password + Space + your local APN”
via a cell phone and if succeeded in setup, the tracker will
return the message “APN OK”.
e.g. send SMS command “APN123456 CMNET”. If succeeded, “APN OK”
is returned by the tracker in SMS.
123456 refer to password of tracker and CMNET is the APN of
China Mobile (One of GSM Operator in China).
18.104.22.168 In most countries, the user name and password
involving GPRS login are not compulsorily necessary, therefore,
the entry can be skipped. For those countries requiring user
name and password, please configure as following:
Send SMS “up+password+space+user+space+password”If succeeded,
“user,password ok” is returned by the tracker in SMS.
22.214.171.124 For instance, send SMS “up123456 jonnes 666666”
to the tracker, and if succeeded, the tracker returns “user,
Note: 123456 is
tracker device password, jonnes is the user name for GPRS login,
666666 is the password for GPRS login.
126.96.36.199. Send SMS as below via a cell phone:
adminip +password + Space + IP Address + Space + Port Number.
If succeeded, “adminip OK” is returned by the device in SMS.
e.g, Send SMS command “adminip123456 188.8.131.52 9000” to the
tracker device, If succeeded, “adminip OK” is returned by the
device in SMS.( 123456 is default password，184.108.40.206
6.30.1 Tracker will change to less GPRS traffic mode after parking 5
minutes, GPRS disconnect and connect again when alarm being
triggered or vehicle starts driving.
6.30.2 Activate this function: Send "less gprs123456 on", tracker
will reply "less gprs on ok".
Deactivate this function: Send "less gprs123456 off", tracker
will reply" less gprs off ok".
Note: 123456 is the
password of tracker, and replace it with the new if you have
6.31.1 The default mode is “SMS”
6.31.2 Send SMS “GPRS+password” to the unit, and it will reply “GPRS
ok!” it means tracker device has switched to “GPRS” mode.
Send SMS “SMS+password” to the unit, it will reply “SMS ok!”
and restore to “SMS” mode.
6.32.1 Setup: send command
“centernum+password+space+number” to tracker, it will
reply“centernum ok”. After setup monitor center number, the
messages of auto track by sms will be set to this center number,
if all alarms need to be sent to this number too, then this
center number must be setup as authorized number.
6.32.2 Cancel: Send “nocenternum+password” to tracker,
it will reply “no center num ok”.
Web based platform
www.gpstrackerxy.com. Configuration IP: 220.127.116.11 Port:
9000. Please check “software platform user manual” included in
the CD for detailed operation information.
6.33.2 PC based installation tracking software user manual
included in the CD in package.
with the instructions to extend the unit life:
Keep the unit dry. Any liquid, i.e. rain, moisture, may
destroy or damage the inside circuitry.
2. Don’t use & store the unit in dusty places.
3. Don’t put the unit in overheated or overcooled places.
4. Handle carefully. Don’t vibrate or shake it violently.
Clear the unit with a piece of dry cloth. Don’t clean in
6. Don’t paint the unit, this may cause some foreign materials
left in between the parts.
7. Don’t disassemble or refit the unit.。
8. Please read the user manual carefully before installation and
operation, learn something more about the voltage range.
Otherwise, it won’t work properly or destroy the product.
8. Faults & the
Fail to turn on
check out the power wiring in correct place.
No GSM Signal
Please make sure SIM Card is GSM Net and installed
correctly; also call display should be on; but no
call transfer and PIN code off.
No GPS Signal
A more open view of the sky is recommended to make
sure the device can receive the GPS signal normally.
SMS reply fail
Password incorrect or wrong sms commands format
Call without SMS reply or cannot receive alarm SMS
Authorized number is wrong or without setting any